Coating job accessories:
 |
Heated material-hoses
GAMA - spraymachines can be assembled with material-hoses up to a length to 93 meters (except "Easy Spray").
High-pressure material-hoses with special inside-life, complete in package with heating, temperature sensor cable and air-line can be ordered in 15 meter sections, covered with scuff-jacket.
Easy to assemble to existing hoses. |
 |
Heated feeding hoses
High viscous materials or an application under low outside-temperatures needs a pre-heating of the material before reaching the machine.
One solution for pre-heating are heated feeding-hoses (3 meters of length), which were assembled between your feeding-pump and inlet-filter of machine.
Pre-heated material so reaches your machine, temperature is adjustable over a temperature-control unit. Current support of 220V. |
 |
Heating belts
Another solution for pre-heating high viscous materials is, to heat up materials directly in drum over heating-belts.
Pre-heated material so reaches your machine, temperature is adjustable over a temperature-control unit. Current support of 220V.
Sometimes (very high filled systems, outstanding environmental conditions) a combination heating-belt/heated feeding-hose is neccessary. |
 |
Drummixer
Every system-supplier is recommending to steer (mix) the B-side well before use.
Our drum-mixer do have the correct dimensions not only to fit the in whole of the drum, also to give a good and well mix of the material (diameters and number of mixing-blades).
Drum-mixers are available with air-motors and electric-motors. |
|
Home 
